Samsung Dryer Not Heating: The Part It Usually Is, What It Costs, and When to Stop

Three come from sources we read and link; four are computed from our own files, which are downloadable at the end of the page.

1. 240 V

   Samsung's own words for the electric no-heat that is not a part: "If the outlet is not supplying enough voltage, the panel and motor may work, but the heater may not." Its fix is a breaker reset, off for 30 seconds and on; its reset page says 1 to 5 minutes unplugged for the electronics. ¹

   Samsung Support, Clothes are not dry after using Samsung dryer (TSG10001001), and How to reset your Samsung dryer (ANS10004810). The not-dry page lists seven causes: blocked exhaust vent, dirty moisture sensors, clogged lint filter, Eco Dry, installation (240 V or the gas line), a tripped breaker, and a vent that does not meet the requirements. It names no part.

2. Ins → 0

   Samsung dryers carry their own airflow test: with the drum cool and empty, hold Adjust Time Up and Dry Level until Ins or In shows, run it, and read 0 or End for clear, CLg, Cg, C80 or C90 for a clogged vent, Ct for a temperature problem. ²

   Samsung TSG10001001, the Vent Blockage Test, repeated word for word by cleverfixes. A HC, hE, HC4 or 1 HC code on Samsung's error-code page means the dryer got too hot; tS, tC, tE and their variants mean a temperature sensor; HC2 is a gas ignition error.

3. 2 of 2

   Both Samsung dryer files in our corpus (DV42H5000EW, DV42H5200EW) list the heating element and the thermal fuse as the no-heat candidates, and both carry the same numbers: element DC47-00019A, thermal fuse DC47-00016A, thermal cutoff DC96-00887A, high-limit DC47-00018A, thermistor DC32-00007A. ¹⁴

   Our repair corpus, two Samsung electric-dryer model files built from vendor repair videos and parts catalogues; iFixit's Samsung replacement guide names the same element (DC47-00019A) and canister assembly (DC97-14486A). Samsung's electric-dryer failure profile in our data gives the heating element 32.5%, the thermal fuse 32.2% and the high-limit thermostat 17.3% of repair-video attention, figures identical to the any-brand electric profile, so not Samsung-specific. Attention share, not a failure rate.

4. 38%

   38% of 314 Reddit comments about Samsung dryers raise the vent, lint or airflow; 36% the heating element; 23% the thermal fuse or cutoff; 12% the breaker or 240 V supply. The most-upvoted thread titled about a Samsung dryer in the harvest is "I am so tired of fixing this Samsung dryer" (455 points, r/appliancerepair); a $625 quote to replace a heating element drew 105 points and 152 comments.

   Counted over comments and posts in threads whose title names a Samsung dryer, or that name Samsung and a dryer term themselves, from 427 harvested threads. Keyword themes; a comment can match several. Method and limits in the field-reports section.

5. Mostly cheap

   The parts that stop a Samsung electric dryer heating run from a cheap thermostat assembly (DC47-00015A) to the complete heater canister (DC97-14486A, the costliest) on Amazon by part number; the thermistor DC32-00007A, the thermal fuse DC47-00016A and the thermal cutoff DC96-00887A are all low-cost, and the bare element DC47-00019A costs more. 911 Appliance's professional figures for the same jobs are $120–$200 for a fuse and $150–$280 for an element. ¹⁶

   Amazon Creators API search on the eight no-heat part numbers in our two Samsung files, lowest listing whose title carries the number; genuine and compatible separated in the decode table. None of the four competing pages we could read (wikiHow, #2 and #7, could not be fetched) names a single Samsung part number; howtofixit gives a $50–150 range for an element and $120–200+ to have it fitted.

6. 0 of 16

   None of the sixteen washer-and-dryer repair professionals Prudent Reviews consulted in 2026 recommends Samsung, and two name it as a brand to avoid: one says LG and Samsung are two brands to stay away from, another that it is extremely hard to get parts for Samsung. Yale Appliance's dryer service-rate report does not carry Samsung at all, and Yale stopped selling Samsung washers by its 2026 report. ¹⁰

   Prudent Reviews, The Most Reliable Washer and Dryer Brands (Andrew Palermo, updated 2026-04-29): Speed Queen 11 of 16, Whirlpool 5, LG, GE, Bosch, Maytag and Asko 2 each. Yale Appliance's 2022 full-size dryer list is Whirlpool 0.4%, LG 2.0%, GE 5.2%, Maytag 6.0%. There is no CPSC recall of a Samsung clothes dryer (both queries run 2026-09-13), and Samsung's warranty terms could not be reached from its site, so no term is stated.

7. $114 vs $29

   The median Samsung dryer in our catalogue costs $114.49 a year to run; Samsung's heat-pump DV25FG62*0 costs $29.00 a year to run. That $85-a-year gap is the only number that ever makes replacing a dryer over a cheap fuse arithmetic instead of impatience. ¹⁵

   annual_cost_usd on 145 Samsung dryer records (109 published) at the catalogue's EIA national residential rate. The Amazon offers are the catalogue's UPC-matched listings; check them, prices move.

Left: which parts the 2 Samsung dryer repair files in our corpus list as no-heat candidates. Right: what the community's Samsung-dryer comments talk about when a dryer stops heating. The repair files rank the parts; the community count puts the vent first among the causes, because a no-heat thread on Reddit is where people go before they buy anything.

Free checks first, then the safety chain (thermal fuse, thermal cutoff, high-limit), then the heater itself. Electric and gas dryers share everything up to the heater: an electric dryer heats with a coil, a gas dryer with an igniter, a valve and a flame sensor. Every part below is matched by part number; where no Samsung number is sourced, the row says so.

• Maker Turn the circuit breaker off, wait 30 seconds, and then turn it back on. ¹
• Maker When the drum is cool and empty, press Adjust Time Up + Dry Level until 'Ins' or 'In' appears on the display. ¹
• Competing guide You can test the coils with a multimeter—they should show roughly 1,000 to 2,000 ohms of resistance. ⁸

Match the symptom, not the part. Each row names the parts in the order the guides and the community check them.

• Not a fault Clothes barely warm, dryer otherwise fine, Eco Dry showing — Samsung: "Eco Dry intentionally reduces heat output to save energy." Turn it off before you buy anything. ¹
• Not a fault Takes forever; Vent Blockage Test reads CLg, Cg, C80 or C90 — Airflow. The vent, the wall cap, the hose behind the machine. Samsung's own first cause, and cleverfixes' whole article. The heater is fine. ¹
• DIY first, then a technician Electric, drum turns, stone cold, nothing else wrong — The breaker first, Samsung's way: off for 30 seconds, then on. One leg of a two-pole 240 V breaker can trip and leave the motor running on 120 V. If it trips again, or the outlet reads 120 V on one side, that is an electrician, not a part. ¹
• DIY part Electric, drum turns, stone cold, breaker fine — The safety chain, then the heater: thermal fuse DC47-00016A and cutoff DC96-00887A by continuity, then the element DC47-00019A at 10–30 Ω on iFixit's figure. Both our Samsung files list the element and the fuse. ¹⁴
• DIY part Heats, then stops heating partway; HC, hE or HC4 on the display — The dryer got too hot, in Samsung's words: high-limit DC47-00018A tripping, or a thermistor DC32-00007A reading wrong. Clean the vent as well, because an overheating dryer is usually a choked dryer. ²
• DIY first, then a technician Gas, igniter never glows, or HC2 — The igniter (50–400 Ω on a-zapplianceparts' figure) once the fuse chain tests good. No sourced Samsung igniter number, so buy by your model's diagram; 911 Appliance's price for the job is $140–280. ⁸
• DIY first, then a technician Gas, igniter glows but no flame, or flame dies — Valve coils (1,000–2,000 Ω per a-zapplianceparts) or the flame sensor. The coils are a DIY swap; if the valve body is suspect, or you smell gas, close the supply and call a technician. ⁸

Free checks, then the safety chain with a multimeter, then the heater, then stop. Unplug before opening any panel; on a gas dryer close the gas valve too. Reconnecting a bypassed thermal fuse is how dryers catch fire, so never run one without it.

1. Minute 0 Settings and the breaker. Eco Dry off. Cycle set to a heated dry. Breaker off for 30 seconds and on, Samsung's own instruction; on an electric Samsung a half-tripped two-pole breaker runs the drum and not the heater.
2. Minute 5 Samsung's Vent Blockage Test. Cool, empty drum, door closed; hold Adjust Time Up and Dry Level until Ins shows. 0 or End is clear; CLg, Cg, C80 or C90 is a clogged vent, and the heater is not your problem yet. Wipe the moisture sensor bars with a drop of dish soap while you are there.
3. Minute 20 Unplug. Meter on the outlet or terminal block (electric). About 120 V from each hot to neutral and about 240 V across the two. 120 V on one side is the supply, not the dryer; it is the fifth and sixth of Samsung's seven causes (installation and breaker).
4. Hour 1 The safety chain. Front lower panel off (911 Appliance's route). Thermal fuse on the blower housing, thermal cutoff and high-limit on the heater box: continuity across each, near 0 Ω good, OL blown. Replace what reads open and clean the vent, because a fuse that blew once will blow again into a blocked duct.
5. Hour 2 The heater itself. Electric: element across the two terminals, 10–30 Ω on iFixit's figure (10–50 on 911 Appliance's), OL is dead, continuity to the canister is a short; the whole canister DC97-14486A swaps as one part if the coil is fragile. Gas: watch the igniter through the burner slot; no glow is the igniter (50–400 Ω), glow without flame is the coils (1,000–2,000 Ω) or the flame sensor.
6. Stop Board, motor circuit, or a gas valve body. Unplug and wait ten minutes for the board to discharge (911 Appliance) before anyone touches it. If 240 V reaches the machine and everything downstream tests good, the heater relay on the board is the last suspect and a technician's call ($250–500 on 911 Appliance's figure); so is any gas valve work beyond the coils.

The repair steps against the two numbers that decide it: what the dryer you have costs to run (our catalogue's median Samsung is $114.49 a year) and what a replacement costs to run (Samsung's heat-pump DV25FG62*0, at $29.00 a year).

1. $0 Eco Dry off, breaker reset, vent test passed, sensors wiped. Samsung's own page starts and ends here. If the Vent Blockage Test reads 0 and the dryer heats, it was never broken. ¹
2. Low cost Thermistor, high-limit, thermal fuse, thermal cutoff. Every sensor and safety in the chain is a low-cost compatible part. 911 Appliance's professional figures for the same jobs: fuse $120–$200, high-limit $120–$220, thermistor $120–$220. Against any replacement dryer none of these is a decision. ⁹
3. Mid cost Heater element or the whole canister (electric). DC47-00019A element; DC97-14486A complete canister. howtofixit's range is $50–150 for the part and $120–200+ to have it fitted; 911 Appliance says $40–$90 and $150–$280. A compatible element costs less than either part range. ⁶
4. $130–$280 Gas: coils or igniter, professional. 911 Appliance: gas valve solenoids $20–$60 part, $130–$250 fitted; igniter $30–$80 part, $140–$280 fitted; house call $49.95, waived with an approved repair. No sourced Samsung part number for either, so no Amazon price is given here. ⁹
5. $250–$500 Control board, professional. 911 Appliance: $100–$250 for the board, $250–$500 for the job. This is the row where a fifteen-year-old vented dryer stops being worth it, because the next row is where the running-cost saving lives. ⁹
6. Replace Replace with a heat pump and keep the difference. Samsung's DV25FG62*0 heat-pump dryer runs $29.00 a year, $85 less than the median Samsung's $114.49. That is a long payback on electricity alone, so it is a reason to choose a heat pump when the dryer is dead, not a reason to kill it. ¹⁵

Each part is the one the corpus files, the guides and the community name for that fault, matched to Amazon listings by part number. The pick is the lowest-priced listing that names the part number.

1. Runs, no heat at all

   Thermal fuse / thermostat assembly DC47-00016A

   DC47-00016A · continuity

   The part a-zapplianceparts and iFixit test first, and the cheapest link in the safety chain. It sits on the blower housing near the element (911 Appliance) and opens when the air stops moving; a good one reads near 0 Ω, a blown one reads OL. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   Genuine listing: none found under the rule in the decode note. A blown fuse is a symptom of a blocked vent; clean the duct before you fit it or it blows again. Never run the dryer with the fuse bridged.

   Check price on Amazon

2. Chain tests good, still cold (electric)

   Heating element DC47-00019A

   DC47-00019A · front lower panel

   The bare coil for the canister. iFixit's replacement guide names this number and 911 Appliance's route is the front lower access panel, two wires off, inspect for breaks and scorch marks. 10–30 Ω on iFixit's figure; OL is dead. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   If the old coil is fragile or the canister insulators are cracked, the complete canister DC97-14486A below swaps as one part.

   Check price on Amazon

3. Runs, no heat, fuse tests good

   Thermal cutoff DC96-00887A

   DC96-00887A · continuity

   The second safety, on the heater box. Same continuity test as the fuse. iFixit's Samsung page puts the cutoff and high-limit first, ahead of the element. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   DC96-00887C is the same cutoff with its bracket, for DV42H5000EW; the decode table has both.

   Check price on Amazon

4. Heats, then quits; HC or hE code

   High-limit thermostat DC47-00018A

   DC47-00018A · continuity

   The thermostat that cuts the heater when the box overheats and resets when it cools; a dryer that heats and then stops, or shows HC, is usually this or the vent. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   Genuine listing: none found under the rule in the decode note. If it trips repeatedly, the cause is airflow, not the thermostat.

   Check price on Amazon

5. Wrong heat, or a tE/tC code

   Thermistor DC32-00007A

   DC32-00007A · multimeter

   The temperature sensor the board reads. 911 Appliance: about 10,000 Ω at 77°F; iFixit: replace if more than 5% off for the temperature. The cheapest of the six parts above and the one to rule out before a board. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   A reading that does not fall as the sensor warms is the failure.

   Check price on Amazon

6. Element dead and the canister tired

   Heater canister assembly DC97-14486A

   DC97-14486A · front lower panel

   The complete heater box with the element, thermostats and insulators fitted, the part iFixit's guide names alongside the bare element. It costs more than the bare coil and takes half the fiddling. On both our Samsung files (DV42H5000EW, DV42H5200EW).

   Confirm the number against your model tag: the DV42H files carry this one, other Samsung platforms differ.

   Check price on Amazon

Prices change, so check the live price on Amazon. Part numbers are from our Samsung dryer repair files (DV42H5000EW, DV42H5200EW) and from the guides we read; confirm against your model's parts diagram. Affiliate links; we earn a commission at no cost to you.

Three things on the record: the codes and the test are Samsung's own, none of the four ranking pages we could read names a part, and the repair trade does not recommend the brand.

Samsung's own causes before any part

7vent, moisture sensors, lint filter, Eco Dry, installation (240 V or gas line), breaker, vent requirements ¹

Ranking guides that name a Samsung part number

0 of 4howtofixit, cleverfixes, a-zapplianceparts and 911 Appliance name components, not numbers (wikiHow, #2 and #7, could not be fetched); our two files and iFixit's guide do ¹⁶

Element reading, four sources

10–50 ΩiFixit 10–30; howtofixit about 10; a-zapplianceparts and 911 Appliance 10–50; OL is the failure on all four ⁴

Repair professionals recommending Samsung

0 of 16Prudent Reviews, 2026; two name it as a brand to avoid, one for parts availability; Samsung is absent from Yale Appliance's dryer service-rate report ¹⁰

CPSC recalls of a Samsung clothes dryer

0queried 2026-09-13; warranty terms not reachable from samsung.com in this pass ¹³

• Maker Electric dryers require 240V outlets. If the outlet is not supplying enough voltage, the panel and motor may work, but the heater may not. ¹
• Repair guide You can check the resistance with a multimeter. You should get a reading between 10 and 30 ohms across the contacts. ⁴
• Repair company Test the thermistor with a multimeter. At room temperature (77 degrees F), a Samsung thermistor should read approximately 10,000 ohms. ⁹
• Service company I would not recommend Samsung or Whirlpool. They seem to have a lot more issues, and it is extremely hard to get parts for Samsung. ¹⁰

8 part numbers from our Samsung dryer repair files and the guides we read, searched on Amazon by number. The table shows each part number, its fault, and which corpus model files carry the part.

Genuine listing found

75%6 of 8 products

In a corpus model file

100%8 of 8 products

DIY-rated

100%8 of 8 products

• 6 of 8 part numbers have a listing that passes the genuine rule; all 8 have a compatible listing.
• The whole safety chain (thermal fuse, thermal cutoff, high-limit, thermostat assembly, thermistor) is made of low-cost compatible parts. The costlier parts are the element and the complete canister.
• Six of the eight numbers are on both Samsung model files (DV42H5000EW and DV42H5200EW); DC47-00015A and DC96-00887C are on DV42H5000EW only; DC47-00019A and DC97-14486A are also named by iFixit's replacement guide. No ranking guide names any Samsung part number.
• Gas parts (igniter, valve coils, flame sensor) and the control board are not in this table because no source we read names a Samsung part number for them; 911 Appliance's job prices for them are in the cost section.

Corpus files = how many of our model files list the part (0 for parts that come from the guides). DIY as the guides rate it; gas valve work beyond the coils is not.

Samsung's three support pages, iFixit's Samsung page and its replacement guide, the four competing pages that rank for the query on Bing that we could fetch (#1, #4, #5 and #6 when we checked on 2026-09-13; wikiHow at #2 and #7 could not be fetched), two reliability sources, the CPSC record, our own repair corpus and the community harvest. Eight give an order of checks; five do not.

We harvested the top-voted threads for nine dryer-no-heat queries on r/appliancerepair, r/Appliances and r/HomeImprovement and kept every comment or post about a Samsung dryer (threads about other appliances, washer-dryer combos and heat-pump units excluded): 314 in all from 427 threads. The shares are the proportion of those comments that raise each theme; a comment can raise more than one. Each quote is a first-person comment from the Samsung set, chosen for fit within its theme; its score at harvest is shown, and the ranked candidates for every theme are in the download.

Method. 427 threads gathered 2026-09-13 from r/appliancerepair (239), r/Appliances (159), r/HomeImprovement (29), through Reddit's public search, sorted by top and by relevance for nine dryer-no-heat queries (four of them brand-specific); Reddit blocked a share of thread fetches, so this is a sample of top-voted discussion and not a complete count. The unit of analysis is a comment or post in a thread whose title names a Samsung dryer, or that itself names Samsung and a dryer term (314 of 4,702 posts and comments harvested); AutoModerator and bot comments are excluded. Themes are keyword matches on the comment's text; a comment can match several. Quotes are trimmed for length and profanity; where a post rather than a comment is quoted, its title is shown before its body; nothing is reworded. Scores are Reddit upvotes at harvest time.

• Bill Gilbert iFixit contributor; author of the Samsung dryer not-heating troubleshooting page
  You can check the resistance with a multimeter. You should get a reading between 10 and 30 ohms across the contacts. iFixit, Samsung Dryer Not Heating ↗
• Ben Schlichter iFixit contributor; author of the Samsung front-load dryer heating element replacement guide
  Use this guide to access and replace the heating element (DC47-00019A) inside the heater canister, or to replace the complete heater canister assembly (DC97-14486A), in a Samsung front load dryer that won't heat. iFixit ↗
• Eugene Smith Author, howtofixit.net
  When you use a multimeter to check the heating element's resistance, the reading should be approximately 10 Ohms. howtofixit.net, Samsung Dryer Not Heating · 2026-02-14 ↗
• Daryll Writer, cleverfixes.com (credential as stated by the site)
  A functioning thermostat should have a reading between 0.1-0.5 ohms. A working thermal fuse should register 0 or close to 0. If the heating element's reading is lower than 10 or over 30, it may need replacing. cleverfixes.com · 2024-01-02 ↗
• Andrew Palermo Founder, Prudent Reviews; consulted sixteen washer-and-dryer repair professionals
  The service expert at Nawara Brothers Home Store, a home appliance sales and service company in Grand Rapids, Michigan, said, “For any modern washer and dryer I would recommend LG or GE products. They seem to have the least amount of service issues. I would not recommend Samsung or Whirlpool. They seem to have a lot more issues, and it is extremely hard to get parts for Samsung.” Prudent Reviews, The Most Reliable Washer and Dryer Brands · 2026-04-29 ↗
• Samsung Electronics America, product support Manufacturer
  Electric dryers require 240V outlets. If the outlet is not supplying enough voltage, the panel and motor may work, but the heater may not. Samsung Support ↗

Community quotes are attributed to their subreddit and score, not to a name. The competitor guides' bylines are as the sites state them.

Why does my Samsung dryer run but not heat?

Because the motor runs on 120 V from one leg of the supply and only the heater needs both legs. Samsung's own words: "the panel and motor may work, but the heater may not" when the outlet is short of 240 V, so one tripped leg of the breaker leaves it tumbling cold; after that it is the safety chain (thermal fuse DC47-00016A, cutoff DC96-00887A) and then the element (DC47-00019A). On a gas Samsung it is the igniter or the valve coils. Check Eco Dry first: it reduces heat on purpose. ¹¹⁴

How do I run the Samsung dryer Vent Blockage Test?

With the drum cool and empty and the door closed, press and hold Adjust Time Up and Dry Level until Ins or In shows on the display, then let it run. 0 or End means the vent is clear; CLg, Cg, C80 or C90 means it is clogged; Ct means a temperature problem. Samsung's page and cleverfixes describe it the same way. ¹⁷

How do I reset a Samsung dryer that is not heating?

Samsung gives two waits: turn the breaker off for 30 seconds and back on (its not-dry page), or unplug for 1 to 5 minutes to clear the electronics (its reset page). 911 Appliance says at least 10 minutes before service so the control board discharges. A reset clears a code; it does not replace a blown fuse. ³⁹

How do I test the thermal fuse on a Samsung dryer?

Unplug it. 911 Appliance: the thermal fuse is on the blower housing near the heating element; the thermal cutoff and high-limit mount on the heater canister (no guide we read states that, so confirm on your parts diagram). Pull both wires and read continuity across the terminals: near 0 Ω is good (a-zapplianceparts, cleverfixes), OL is blown. Replace what reads open (DC47-00016A, DC96-00887A) and clean the vent, or the new one blows the same way. Never bridge a fuse to test the heater. ⁹⁸

What should a Samsung dryer heating element read on a multimeter?

iFixit: 10 to 30 Ω across the contacts. howtofixit: about 10 Ω. a-zapplianceparts and 911 Appliance: 10 to 50 Ω. The ranges overlap and none cites a tech sheet; an open reading (OL), a visibly broken coil, or continuity from a terminal to the metal canister is the failure on every source. ⁴⁹

What do HC, hE, tE or HC2 mean on a Samsung dryer?

From Samsung's error-code page: HC, hE, HC4 and 1 HC mean the dryer is getting too hot (vent, high-limit thermostat, thermistor); tS, t5, tC, tO, tE, tE3, tC5, tCS and the 1 tC variants mean a problem with the temperature or the sensors that measure it (thermistor first, about 10,000 Ω at 77°F per 911 Appliance); HC2 is a gas ignition error. ²⁹

How much does it cost to fix a Samsung dryer that is not heating?

The parts run from a cheap thermostat assembly (DC47-00015A) to the complete heater canister (the costliest part) on Amazon by part number; the thermal fuse and the high-limit are cheap, and the element alone costs more. Professional figures from 911 Appliance: thermal fuse $120–$200, element $150–$280, thermistor $120–$220, gas coils $130–$250, igniter $140–$280, control board $250–$500; howtofixit says $120–200+ to have an element fitted. ¹⁶⁹

Is it worth repairing a Samsung dryer?

For anything in the safety chain or the element, yes at any age: the parts are low-cost. What changes the answer is the running cost: the median Samsung dryer costs $114.49 a year to run and Samsung's heat-pump DV25FG62*0 about $29.00, so a dead board ($250–$500 on 911 Appliance's figure) on an old vented dryer is where replacement starts to pay. ¹⁵⁹

Are Samsung dryers reliable?

The one series that measures dryers, Yale Appliance's 2022 report, does not carry Samsung (Whirlpool 0.4%, LG 2.0%, GE 5.2%, Maytag 6.0%), and Yale had stopped selling Samsung washers by its 2026 report. None of the sixteen repair professionals Prudent Reviews consulted in 2026 recommends Samsung; one says LG and Samsung are brands to stay away from, another that it is extremely hard to get parts for Samsung. Consumer Reports surveys the brand but its score is paywalled. The no-heat parts themselves are ordinary and cheap; the trade's complaint is parts and service. ¹⁰¹¹¹²

Was there a recall on Samsung dryers?

No. A CPSC search on "samsung dryer" returns nothing, and the regulator's full dryer list (mostly hair dryers) holds no Samsung clothes dryer. Samsung's warranty terms could not be reached from its site in this pass, so none is stated here. ¹³

Which Samsung part numbers fit my dryer?

From our two model files (DV42H5000EW, DV42H5200EW), both electric: heating element DC47-00019A or the complete canister DC97-14486A, thermal fuse DC47-00016A, thermal cutoff DC96-00887A (DC96-00887C with bracket), high-limit DC47-00018A, thermostat assembly DC47-00015A, thermistor DC32-00007A. No ranking guide names a Samsung igniter or valve number; check the parts diagram for your model tag before ordering. ¹⁴⁵

• Samsung dryer: won't spin — belt, idler, motor, when the heat is fine and the drum is not
• Samsung dryer: won't start — the other thing a thermal fuse does on some models
• Samsung dryer: noisy — belt, rollers, idler
• Dryer not heating, any brand — the generic version
• Dryers: running cost by model — the catalogue, for the replace side of the math

1. 1

   Clothes are not dry after using Samsung dryer (troubleshooting TSG10001001)

   Samsung Electronics America · samsung.com/us/support · 2026

2. 2

   Samsung dryer displays an error code (troubleshooting TSG10001006)

   Samsung Electronics America · samsung.com/us/support · 2026

3. 3

   How to reset your Samsung dryer (ANS10004810)

   Samsung Electronics America · samsung.com/us/support · 2026

4. 4

   Samsung Dryer Not Heating (troubleshooting)

   Gilbert B and contributors; iFixit · ifixit.com · 2026

5. 5

   Samsung Front Load Dryer Heating Element Replacement

   Schlichter B and contributors; iFixit · ifixit.com · 2026

6. 6

   Samsung Dryer Not Heating? 5 Most Common Causes & Easy DIY Fixes

   Smith E; howtofixit.net · howtofixit.net, 2026-02-14 · 2026

7. 7

   Samsung Dryer Not Heating: 5 Quick and Easy Fixes!

   cleverfixes.com (byline Daryll) · cleverfixes.com, 2024-01-02 · 2024

8. 8

   Samsung Dryer Not Heating? 6 Common Causes and How to Fix Them

   a-zapplianceparts.com · a-zapplianceparts.com, 2026-05-12 · 2026

9. 9

   Samsung Dryer Not Heating? Troubleshooting Guide and Common Causes

   911 Appliance Repair, San Diego · 911appliance.com, 2026-07-13 · 2026

10. 10

    The Most Reliable Washer and Dryer Brands (and Brands to Avoid)

    Palermo A; Prudent Reviews · prudentreviews.com, updated 2026-04-29 · 2026

11. 11

    Most Reliable Full-Size Clothes Dryer Brands for 2022

    Sheinkopf S; Yale Appliance · blog.yaleappliance.com, 2022-01-19 · 2022

12. 12

    Most and Least Reliable Clothes Dryer Brands (unpaywalled summary)

    Flamer K; Consumer Reports · consumerreports.org, updated 2026-04-24 · 2026

13. 13

    CPSC recall database, queries "samsung dryer" and "dryer" (no Samsung clothes-dryer recall), queried 2026-09-13

    U.S. Consumer Product Safety Commission · saferproducts.gov · 2026

14. 14

    Verified Appliance Data repair corpus: two Samsung dryer model files (DV42H5000EW, DV42H5200EW) and the electric-dryer failure profile

    Verified Appliance Data · downloadable below (CC BY 4.0) · 2026

15. 15

    Verified Appliance Data catalogue: Samsung dryers and all dryers, annual_cost_usd

    Verified Appliance Data · verifiedappliancedata.com/dryers/ · 2026

16. 16

    Amazon listings for eight Samsung dryer part numbers, Creators API pull 2026-09-13

    Verified Appliance Data · downloadable below (CC BY 4.0) · 2026

17. 17

    Reddit (r/appliancerepair, r/Appliances, r/HomeImprovement): threads and comments about Samsung dryers not heating, harvested 2026-09-13

    community · reddit.com · 2026